Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 851 / 888 > wheel spindle/crash bung help

[burtsp5]

Hi Jasp,

send me down all the measurments and i'll run one off for you at work, no worries.I'll drill and tap out the threads at 8 mm /1.25 pitch so you can fit them straight in.

[Jasper]

Hi Guy,

Thanks for the offer mate,but I'm ok with lathes,mills and shaping machines.Thanks anyway.

Originally Posted by burtsp5

Hi Jasp,

send me down all the measurments and i'll run one off for you at work, no worries.I'll drill and tap out the threads at 8 mm /1.25 pitch so you can fit them straight in.