Ducati Sporting Club UK
General Motorcycles only
General motorcycle issues, including non-Ducati, but keep it motorcycles!
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 23-Sep-2009, 00:20
NBs996's Avatar
NBs996 NBs996 is offline
Registered Forum User
Ducati in my Blood
 
Posts: 4,728
Join Date: Sep 2003
Mood: I love my 996 xxx
Thanks shazaam, that's just what I was thinking.

I've been a bit curious as to why a twin setup is considered by some to be some kind of performance upgrade, when theoretically all it does is make the lever action softer. Thought I might be missing something!

I've got the twin setup on the 620 for just this reason, I've come to prefer a softer lever with a bit more travel between on and off, and lets me fine tune me braking pressure easier.
Quote+Reply
  #2  
Old 23-Sep-2009, 09:10
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,275
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
As mastercylinder/lever ratios can be matched to either setup, the standard setup on bikes from the factory will also be considering costs and possibly weight as the 916 style setup with the short hose T-ing off across the mudguard must weigh less than 2 full length hoses with the extra banjo fitting and double banjo bolt.

Most of my bikes have a T piece just above the bottom yoke so there is only about 200mm of single brake line, so not alot lost on the hose expansion/softening effect over the standard system and only a little bit saved over the two seperate hose setup. But then mostmy brake setups are fitted to either Brembo or AP Radial Mastercylinders, the AP giving the best setup with its adjustable ratio


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  #3  
Old 23-Sep-2009, 14:13
MLC Racing's Avatar
MLC Racing MLC Racing is offline
Registered Forum User
500SD
 
Posts: 620
Join Date: Jun 2006
Mood: Moto Guzzi are the new Ducati??
Thumbs up

I may be wrong but I always understood that ACU rules insist on the '1 line for each caliper from the master cylinder' arrangement. The single hose and splitter was road use only!
Quote+Reply
  #4  
Old 23-Sep-2009, 14:19
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,275
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
Quote:
Originally Posted by MLC Racing
I may be wrong but I always understood that ACU rules insist on the '1 line for each caliper from the master cylinder' arrangement. The single hose and splitter was road use only!

Dave the ACU rules say the Hose must split above the Bottom yoke

So you have the choice of two seperate Lines coming from the M/cyl or a single line from the M/cyl to a T piece above the top yoke and then a line down to each caliper

With either setup having a cable tie holding the two together below the line of the bottom yoke has been known to fail scrutineering


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 21:00.