Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Amp Superseal connectors

[Jasper]

Hi Mate,

I have an 8 way male/female and a 10 way female.The 10 way i used when I had my 748/853 and used it to connect a digi dash into the original loom,which sounds like what you want!Pics below:

I may have some spare sockets if you need them,If i don't,I can probably get you some.

[Col996s]

Thanks Jasper PM sent.

[Col996s]

Thanks to Jasper for the 10way connector.
I'm still having trouble locating the 6way. Having removed the headlight I can see the connector and it is not an Amp type but is a Delphi as well. The 6 way doesn't seem to be stocked by the Company that was suggested in this link.

[Jasper]

Hi mate,

sorry,you only said you wanted the 10 way.I have a 6 way as well!!

[Col996s]

Originally Posted by Jasper

Hi mate,

sorry,you only said you wanted the 10 way.I have a 6 way as well!!

My fault, intially I thought they were Amp ones in which case the 6 way was avaiable from lots of places but now I see they are Delpi, I'm struggling to locate the 6 way.

[skidlids]

http://cgi.ebay.com/ebaymotors/Weath...Race_Car_Parts

[Col996s]

Thanks to everyone, especially Jasper. I now have all the connectors I needed to make up a loom for my Translogic dash.
Although a 6 way Delphi connector is fitted on the 996's clocks it is compatable with the 6 way Amp connector. The 10way is only made by Delphi.
You live and learn!