Urgent help please non starting

skidlids · 24-Apr-2011, 23:56

does the immobiliser indicator go off at the end of the power up sequence after turning the key to ON
If so I would be trying to bypass the starter solinoid and getting 12 volts straight to the starter motor to see if it fires up when the engines turned over, to determine if its just the starter solinoid circuit or if its a bit more complicated.

Being honest I would probably plug my Mathesis in first but above is one of the things I would be trying if I didn't have any diagnostic tools

Jasper · 25-Apr-2011, 21:04

Without insulting your intelligence,Is your Side stand still down?

andyc · 26-Apr-2011, 08:12

all sorted now, took the starter solenoid off and stuck 12v across it and it was working fine, put it all back together and it started, my be it was stuck!!!!! Anyway thanks for the help.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

25-Apr-2011, 21:04	#2
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Without insulting your intelligence,Is your Side stand still down? Reply

26-Apr-2011, 08:12	#3
andyc Registered Forum User Mille Posts: 167 Join Date: Jan 2005 Location: Canewdon Essex all sorted now, took the starter solenoid off and stuck 12v across it and it was working fine, put it all back together and it started, my be it was stuck!!!!! Anyway thanks for the help. Reply