Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > what clutch master cylinder should i use?

[Cranker V2]

I use a bog standard 916/748 one, though some people have upgraded to brembo billet type. Works ok and is cheap to replace blades on etc. For the resevoir i have a brembo 15ml unit mounted on the top yoke. its the same set up on my 853r, and never had any problems.

[848spence]

Well the one i have works but 1st crash and i dropped oil from top to bottom of paddock hill. i was very popular lol so want solid one really

[bradders]

std monster one for me spence - cheap as chips and crashes well!

[848spence]

Originally Posted by bradders

std monster one for me spence - cheap as chips and crashes well!

has yours got plastic resevoir mate? or metal in one?

[Cranker V2]

A solid coffin one get a smack means its totally written off. Thats why race bikes use ones with a remote resevoir. I had plenty of offs (yes plenty) and never damaged the resevoir.

[848spence]

Originally Posted by Cranker V2

A solid coffin one get a smack means its totally written off. Thats why race bikes use ones with a remote resevoir. I had plenty of offs (yes plenty) and never damaged the resevoir.

I suppose it was my first off on the monster and suppose just unlucky i dont intend to come off much next year, might just get a spare though

[bradders]

Originally Posted by Cranker V2

A solid coffin one get a smack means its totally written off. Thats why race bikes use ones with a remote resevoir. I had plenty of offs (yes plenty) and never damaged the resevoir.

mine is just loose enough the lot flips up...and bar wide enough it doesn't touch much...not that I crash as much as you

[kiwicoops]

Don,t get one off an S4, the ratio must be different, its a heavy pull on my 583.

pete