Ducati Sporting Club UK > General > Technical - Help or Info - NON Motorcycle > Repair of Paul Smart Clocks

[PDL]

Had the speedo fail on my S4r, changed the sensor and they still didn't work. It turned out I had plugged the cables back in wrongly on the rear light. If there a short on the same circuit the clocks won't work. Worth a try before dishing out 100 plus on a new sensor. The clocks, brake light and horn are also on the same fuse from memory

[skidlids]

Originally Posted by PDL

. Worth a try before dishing out 100 plus on a new sensor.

The link I put up for Franco a few days ago was £7.99

[PDL]

Really, Ducati Manc quoted just over 100 when I asked, unless they got the wrong part. It was over the phone. I got one from the states for 30 quid which still is over the top considering your price. I thought 100 was a bit over the top for a magnet and some wires

[deep diver]

Hi

Have cleaned the area and the sencor, lights working all o.k, but it does look as if some one has been playing with the clocks, so this could be the fault.

It looks as if I may have to get some new clocks then.

[skidlids]

Originally Posted by deep diver

.

It looks as if I may have to get some new clocks then.

Thats not going to be cheap as NEW clocks cost a rather large packet of folding stuff. I would certainly be eliminating everything else first

As the clocks are coded to the Keys and in turn the ECU is coded to the clocks its not easy just to borrow a set to try as you need to borrow the complete package

[chrisw]

Give these guys a call before you throw the towel in

http://www.scorpio-electronics.co.uk/index.html