Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > Anyone using 848/1098 race fairings in 2012?

[848spence]

Originally Posted by Bionicle

You could try emailing Dave at www.hcracetech.co.uk and ask if you can do a deal on just a nose cone, its a long shot but worth a try

Yeah good plan

[Spjallen]

Or race products. Great guy. I'm sure Mark would do you a good deal. 01673 842704

[bradders]

if you get stuck Spence let me know how much, I will probably be running 848 but even if not always nice to have spares for my 848

[848spence]

Originally Posted by bradders

if you get stuck Spence let me know how much, I will probably be running 848 but even if not always nice to have spares for my 848

Will do bradders, awaiting a few emails back

[Jolley]

CRC and Ricami Weiss list nose cones separately.

[848spence]

I got one yesterday. But fitting it?!?!?! uuummmm.

[Chaz]

The 848 nose dosn't lend it's self to fit as the 748/9** dose it relies on the side panels & 2 fixings near the screen the 748 one has 4 fittings to the nose cone, but anything can be made fit.

[dunlop0_1]

Originally Posted by Jolley

CRC and Ricami Weiss list nose cones separately.

My spare set of 996 fairings are from the above. Superb quality and not to expensive.

[Jolley]

I had full 848 fairing, but the bracket would have allowed me to run just the nose on it's own. It mounted to the sides of the screen, with a third arm down to allow a fixing to the bottom centre of the nose (there is a flat section there). Mine was fabricated by Dave Wood at DWR in Aylesbury... He can make up whatever you want.