Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > Anyone using 848/1098 race fairings in 2012?

[bradders]

Cut the sides off, you won't be using them, then it only fixes by the screen. Did that on my 996 one and seemed to work ok and mean I didn't need anything to fit the sides

[848spence]

Originally Posted by bradders

Cut the sides off, you won't be using them, then it only fixes by the screen. Did that on my 996 one and seemed to work ok and mean I didn't need anything to fit the sides

Yeah going to get cutting now.

[dunlop0_1]

Originally Posted by Jolley

CRC and Ricami Weiss list nose cones separately.

My spare set of 996 fairings are from the above. Superb quality and not to expensive.

[Jolley]

I had full 848 fairing, but the bracket would have allowed me to run just the nose on it's own. It mounted to the sides of the screen, with a third arm down to allow a fixing to the bottom centre of the nose (there is a flat section there). Mine was fabricated by Dave Wood at DWR in Aylesbury... He can make up whatever you want.

[848spence]

Originally Posted by Jolley

I had full 848 fairing, but the bracket would have allowed me to run just the nose on it's own. It mounted to the sides of the screen, with a third arm down to allow a fixing to the bottom centre of the nose (there is a flat section there). Mine was fabricated by Dave Wood at DWR in Aylesbury... He can make up whatever you want.

Its ok i'm making fabricating one at work today, out of old one i in aluminium