Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Clutch lever - plunger pin problems

[KeefyB]

Originally Posted by 007

Is the plunger pin assembly available as a spare part? Does anyone have one please?

The pin assembly is part of the lever and not available separately.AF1 racing in the USA sell spare pins,but they work out around £45 with the postage.
AFAIK,nobody in the UK sells them.Best bet is to buy a s/h lever and be careful removing the pin assembly.

Forgot to say,iirc,the pin has loctite on the threads.Once the grub screw has been loosened,the pin should come out by carefully turning it out of the front of the lever.(In other words,screw it in,....if that makes sense!)