Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 1198 / 1098 / 848 > 1098 Dash connector pins

[desmo_pt]

Hi,

Anyone knows where to find 1098 dash connector pins?

Regards

Pedro

[chrisw]

If it's the same style as the 749/999 then RS Components sell them

http://uk.rs-online.com/web/p/produc...3D4E4F4 E4526

I think I have one cut off an old 999 loom if that is any good

[desmo_pt]

Originally Posted by chrisw

If it's the same style as the 749/999 then RS Components sell them

http://uk.rs-online.com/web/p/products/6807765/?searchTerm=680-7765&relevancy-data=636F3D3126696E3D4931384E525353746F636B4E756D6 265724D504E266C753D656E266D6D3D6D61746368616C6C267 06D3D5E5C647B337D5B5C732D2F255C2E5D5C647B332C347D2 426706F3D313426736E3D592673743D52535F53544F434B5F4 E554D424552267573743D3638302D373736352677633D4E4F4 E4526

I think I have one cut off an old 999 loom if that is any good

Hi Chris do you have a complete plug?

How much do you want for it?

Cheers

[chrisw]

I've got the loom side connector, if that is what you want. It was cut from a damaged loom, so has sufficient wire on it to connect up. I don't want anything for it as it's been in my box of bits for years. Any use to you?

[desmo_pt]

Hi Chris,

That would be great! I think i can use the pins form the old plug in the new.

I will send you a pm with my address.

Thank you

Pedro

[chrisw]

Just had a look at the connector. I have worked out how the pins are removed. On one side of the connector is a single oblong that is white, on the other, two smaller oblongs that are white. Just push in the single oblong with a screwdriver. Pull the wire and it comes out. Simples.

Do you want them taking out?

[desmo_pt]

If you don't mind.

Thank you once more

Pedro

[skidlids]

Originally Posted by chrisw

Just push in the single oblong with a screwdriver. Pull the wire and it comes out. Simples.

Certainly is