Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue Parts For Sale & Wanted > Race loom.....damn electronic stuff

[Cranker V2]

fancy doing another? plenty of beers tokens in exchange?

[skidlids]

Be finding the time Mike, especially if complicated
Madmostin also wants me to pop up to West Brom and do the Harness on his Monster 620

For tomorrow, Matt had a 620 Multistrada loom but thats not suitable for the ECU he is using, neither was the Air temp sensor, so I'm going to have to adapt a loom off of S4R I had lying around

Q1/ Do you have a Standard Monster of Supersport 620 Loom as a starting point

Q2/ are using 620 Coded ECU
Q3/ are using 620 Coded Clocks
Q3/ are you going to be needing the Key Transponder (normally answered by the questions above)
Q4/What Coils are you using

[Cranker V2]

Q1/ Do you have a Standard Monster of Supersport 620 Loom as a starting point - Yes standard 620ie monster loom

Q2/ are using 620 Coded ECU - Yes, sent away to be virginised
Q3/ are using 620 Coded Clocks - No
Q3/ are you going to be needing the Key Transponder (normally answered by the questions above) - N immobiliser finction disabled
Q4/What Coils are you using - Standard monster 620ie ones - unless there is a better alternative???????

I know you are busy Kev. if you can siggest a company to it I would be happy.

Mike.

[skidlids]

Mike
Virginised and IMMO OFF are two different things
A virginised ECU still needs the clocks where as one with the IMMO Function removed or disabled does not

Can you clarrify which as both are mentioned in your post above

[Cranker V2]

immo off

[skidlids]

Bit like Senna3's conversion then, although we kept 5 of the clock wires for the SSie Tacho, temp gauge and oil light.

Is it from a 2002 model or later as the Start interlocks are different

[Cranker V2]

its a 2002 reg bike, not sure on build year.