Quote:
| Originally Posted by ells Having chatted to local mechanic he too suspects the lack of the tank to breathe. Cant see any way to remove the ball bearings but will have a good look.
Cut open and inspected the fuel filter. Learnt its ok to blow through the fuel filter but sucking is a silly thing to do.
Little bit of rubbish on the tank side of the filter (need new filter now I have cut it open.)
Tried blowing past the ball bearing from both sides but to no avail. Definatelt lack of air. Get a good old hiss when I open the cap. I suppose drilling out the ball bearing is not acceptable on a race bike.
Cheers
Mark |
Drilled mine out, so do not see why you cant.
Chris
19-Feb-2012, 18:26 
Threaded Mode