wanted. quickshifter for 996 race pattern

zxrjohn14 · 27-Apr-2012, 18:50

As title.
I'm after a quickshift. would love the lever only type and loom.
The bike has a pc 111 usb but have been advised to have the type that cuts the coils.
It has 2 wires that go into the coils.
Thanks
John

Chaz · 28-Apr-2012, 20:23

I wouldn't bother they **** up the boxes

zxrjohn14 · 28-Apr-2012, 21:53

I've heard this. but also spoke to alot of fellow racers who have had no issues what so ever with them. spoke to a few ducati tuners and all are advising a shifter that cuts the coils and not the fuel as these are the ones which, in there opinion, have given issues in the past.
I just love the things and have raced for the last 10 years with one and would like one on my trackday toy.

skidlids · 29-Apr-2012, 01:25

I have the techtronics one that I took off my 998R about somewhere, originally it came with a reverse pattern lever which I changed to standard pattern linkage set up with a push rod sensor, but later removed the whole lot.
I'l check to see which bits I still have kicking around.

I have a KLS one for my 955

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

27-Apr-2012, 18:50	#1
zxrjohn14 Registered Forum User Posts: 24 Join Date: Jan 2012 wanted. quickshifter for 996 race pattern As title. I'm after a quickshift. would love the lever only type and loom. The bike has a pc 111 usb but have been advised to have the type that cuts the coils. It has 2 wires that go into the coils. Thanks John Reply

28-Apr-2012, 20:23	#2
Chaz Registered Forum User Ducati Corse Bikes: 916 Strada Posts: 3,844 Join Date: Jul 2003 Location: At some track or another:) Mood: www.od2racing.co.uk I wouldn't bother they **** up the boxes Reply