Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > Loom and/or help required

[bally71]

Many thanks as always kev

Got the ECU, clocks and key?barrel for the 800 that's not a prob

Had a little look at the wiring diagrams and from what I can tell:

The 900 got fuel inj first (loom 1)

The 620 and the 750 got it 2002 with a revised ECU and loom (loom 2)

900 loom got revised again 2002 (loom 3)

620 revised to loom 3 2004

So I'm guessing if I want to plug and play with the 800 ECU I'd need a 900 loom post 02 or any other post 04 (or one off an 800 obviously)

Does that sound about right?

I think rewiring the loom is a little beyond my meagre ability ..

Think will try the 620 ECU / PCIII with the 750 motor first

[skidlids]

The main difference between the (loom2) and (loom3) is the starting circuit and the neutral switch and its various interlocks to do with the sidstand switch and clutch switch.