Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > General Motorcycles only > Help please - Rev counter on 1098?

[pbrown]

Ducatidiag crashes everytime i turn the engine on. very very occasionally it has actually worked but 9 times out of 10 it fails.

Resigning myself to missing Croft - shouldn't have fallen off at Donny!!!!

[chrisw]

Originally Posted by pbrown

Ducatidiag crashes everytime i turn the engine on. very very occasionally it has actually worked but 9 times out of 10 it fails.

Resigning myself to missing Croft - shouldn't have fallen off at Donny!!!!

The solution for this is to use a USB hub. There is a post on the Ducatidiag forum about it.

[pbrown]

Tried using a hub before & different computers without much sucess.

Tried again, downloaded latest KKL drivers, run as XP compatible & as admin.
Connected to check to see if it works, disconnected then started bike & connect again. After a bit of fiddling & a couple of 'not responding' finally got it to work reasonably consistently.

Just have to hope Croft noise man accepts the laptop rev counter, can't see why he won't & that DD working tonight wasn't a fluke.

Hoping for fine weather now.

[pbrown]

New & existing clocks have been returned from Scorpio electronics after being cloned. New clock now has same mileage as existing & bike turns over with new clock in place using the existing keys.
Bike can’t be started yet as the petrol tank is not connected but fairly sure the IMMO affected the starter circuit so think this is a result.