| Roy,
Seen this a bit late but...........
My calipers seized after a winter run and no cleaning..
Free'd them up for the DSC Cadwell track day by using the following method.
Put a zip-tie between the pads and lock it around the caliper body (to hold one side/set of pads in place).
Pump the brake lever thus forcing the free set of pads out. Lube up the pistons with grease or a liquid lube. Using a suitable tool, then push the pistons back in and repeat as necessary. Then do the same with the other side of the caliper and obviously the same with the other caliper unit.
Free'd my up fine.
Hope you get this in time rather than lose your trackday.
GC
[Edited on 10-7-2004 by Guido] | 
Guido
Threaded Mode