Quote:
| Originally Posted by jerryz
so where do i get an 8nm spring for 996 fork from?????????? |
Not sure,
but I would be seeing if I could use one of the 04745 Series of Ohlins springs for their R&T forks
They have a 0.5mm smaller OD at 37.5 and are 47mm shorter at 240mm so would need a spacer making
But the choice of springs is quite wide
4745-75, 7.5 N/mm (marking -75).
4745-80, 8.0 N/mm (marking -80).
4745-85, 8.5 N/mm (marking -85).
4745-90, 9.0 N/mm (marking -90).
4745-95, 9.5 N/mm (marking -95).
4745-10, 10.0 N/mm (marking -10).
4745-05, 10.5 N/mm (marking -05).
4745-11, 11.0 N/mm (marking -11).
Ohlins spring for the 996 is a 8627-90
OD/Length/Rate
38/287/9.0
The 04745 range are
OD/Length/Rate
37.5/240/x.x
skidlids
Threaded Mode