SS Alternator Rotor

Jasper · 12-Mar-2013, 20:31

Can someone tell me if there is a spacer that goes between the rotor and flywheel on an SS? Looking at trying to run a smaller alternator on the SP5 and the SS one is smaller and looks like it will fit the bill.

If the answer is yes, does anybody have the dimensions and/or pic? Or even a spare spacer(if there is one).

Cheers,
Jasper

Ghost · 12-Mar-2013, 20:42

Quote:

Originally Posted by Jasper

Can someone tell me if there is a spacer that goes between the rotor and flywheel on an SS? Looking at trying to run a smaller alternator on the SP5 and the SS one is smaller and looks like it will fit the bill.

If the answer is yes, does anybody have the dimensions and/or pic? Or even a spare spacer(if there is one).

Cheers,
Jasper

I have just replaced one on a 583 SS and can confirm there isn't a spacer.

Jasper · 12-Mar-2013, 21:10

Thanks mate.

Iconic944ss · 13-Mar-2013, 18:09

Seems not on the 900 as well, Jasp:

Jasper · 14-Mar-2013, 23:37

I think the spacing difference is taken up in the flywheel. Here are the two to compare:

888

Jasper · 14-Mar-2013, 23:40

750ss

paynep · 15-Mar-2013, 22:02

Hi chaps, I've found a rotor that measures 76mm diameter, 46mm deep with 19mm hole. Is this from a 2V or 4V motor?

Cheers, Paul

Jasper · 15-Mar-2013, 22:15

The 888 one is 49mm.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

12-Mar-2013, 21:10	#3
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Thanks mate. Reply

13-Mar-2013, 18:09	#4
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Seems not on the 900 as well, Jasp: Reply

15-Mar-2013, 22:02	#7
paynep DSC Club Member Ducati Meccanica Posts: 2,081 Join Date: Jun 2001 Location: Alton Mood: Wet wet wet Hi chaps, I've found a rotor that measures 76mm diameter, 46mm deep with 19mm hole. Is this from a 2V or 4V motor? Cheers, Paul Paul 15th year in DD #68 and getting slower by the year 1199, SS800 & 620SSie DD racer Reply