Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-Apr-2013, 05:22
dunlop0_1's Avatar
dunlop0_1 dunlop0_1 is offline
Registered Forum User
Big Twin
 
Posts: 1,568
Join Date: May 2009
Quote:
Originally Posted by skidlids
No sales pitch, just that the early systems are limited by the early type injectors with the Green ones only flowing 270cc/min at 3 bar, hence the need to go to two of them on the 996 to keep up with the fuel requirement at wide open throttle. The later Pico injectors come with a wide variety of fuel flows at 3 bar of pressure. Brown band ones as used on 620s are 330cc/min and the Yellow band ones are 490cc/min. So can easily provide enough fuel without having to run the duty cycle to long putting reducing the load on the electronics. A 59M ECU is a lot smaller and lighter than a 1.6M or a P8 so suffers less from vibration and can be used with a newer harness.
My option if allowed would be 748R Injectors and throttle bodies with the restriction bored out, a 59M ECU programmed to suit and use a modified Monster 620 Harness

I like the sound of this.
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 17:09.