Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > Maybe time for a change

[skidlids]

Meanwhile a couple of miles away, someone else is busy building their DD bike

[Spjallen]

Great news!

[skidlids]

Wiring - seems to take forever then you have little to show for it.

Still at least it stayed dry for a couple of hours

[skidlids]

Another couple of hours wiring today, so both coils and both injectors are now wired along with the engine Temp sensor, Fuel Pump, Start Solenoid, Injection Relay and handlebar switch gear.
The Run button controls the Injection relay and pressing the start button brings in the starter solinoid.
Wires are also in for the Neutral and oil pressure LEDs and also the temp gauge and tacho.

Still have to add wires to the ECU connector for MAP/Air temp sensor but apart from that there's not much else to do apart from switched feeds for the direct powered transponder and lap timer and the charging system

Still trying to decide with which Reg/Rec to go with

[skidlids]

always a good sign when they start first push of the button, despite the lack of exhaust, engine temp sensor, air temp and pressure sensor

[bally71]

Bet the neighbours love you

[skidlids]

Originally Posted by bally71

Bet the neighbours love you

Doubt if its a problem as nobody could hear the bike above the neighbours stereo or their lad racing around the streets on his Minimoto