Ducati Sporting Club UK
DesmoDue - General Questions and Chat
Discussions on the race series devised and supported by the DSC.
 
 
Thread Tools Search this Thread Display Modes
Old 14-Dec-2013, 00:53   #1
Trumpet Trumpet is offline
Registered Forum User
Montjuic
Bikes: Triumph Speed Triple/DD 620/
 
Posts: 76
Join Date: Mar 2012
Location: Oban
Mood: It's a grand life if you don't weaken
Scutineering failure prevention work
I got the oil pressure sensor threadlocked and lockwired and was starting to fell smug, but then noticed that the neutral light had stopped working, I checked back and it's the sensor itself....doh!
So how the hell do you get that little bugger out and a new one back in? It was suggested that I buy a long reach socket and cut a slot up the side for the cable....is there another way to tighten a replacement in?

Finally, I would like to keep the tank clip on the front because the closing action of the flip clip helps to pull the tank down tight onto the frame / chassis. So has anyone worked out how to easily (got to be easy for me!) add a seondary fixing.
The only way I could think of putting a more secure fixing is to remove the flip clip and use the mounting holes for a metal strap that then gets bolted to the plate where the wire clip hooked on. This would be a bit of a faff to lift the tank but cant see another way of pulling the tank down tight.

Last year I thought I may have felt nervous on the start line, it was great I never did.....cant say the same about going in to scrotumeering though!
Reply
Old 14-Dec-2013, 08:33   #2
Ghost Ghost is offline
Registered Forum User
Big Twin
Bikes: Ducati 749, Phil Read Replica, DD 620
Ghost's Avatar
 
Posts: 1,830
Join Date: Mar 2008
Location: Coventry
Mood: 2011 DD Class 'B' Champion
Mark, do you really need a light to tell you it's in neutral? Same as the oil light, are you going to pull over or stop mid race because the light comes on.
Reply
Old 14-Dec-2013, 10:54   #3
milesaway milesaway is offline
Registered Forum User
Mille
Bikes: 900ss 600ss xr400
milesaway's Avatar
 
Posts: 270
Join Date: May 2011
Location: mid wales
neutral light seems a useless item to me- never been wired on mine anyway- mine came out easy with long reach socket- if yrs is knackered just cut off the wire and use the long reach socket- my socket had a small hole in side which could put screwdriver in- blanking bolt is a m8x 1.0mm pitch about 16/20mm long and a copper washer- job done (once you can find a bolt)

oil light? i think i would stop if i saw it as i cant really afford engines- chances are i wouldn't see it in a race though
Reply
Old 14-Dec-2013, 22:55   #4
Trumpet Trumpet is offline
Registered Forum User
Montjuic
Bikes: Triumph Speed Triple/DD 620/
 
Posts: 76
Join Date: Mar 2012
Location: Oban
Mood: It's a grand life if you don't weaken
Confession!!!!!
All is good advice...however!
Lock wired in the oil pressure sensor and all good, starting to feel smug again (should have known at that point I was about to get a lesson in humility....but oh no, smuggness prevailed). Really worked out elegent answer for tank retainer strap.....smuggness increased.
As the neutral light was not coming on I wondered what was causing it so decided to investigate. So ended up grinding down a 13mm ring spanner so I could remove offending neutral sensor, that done I wiped off the oil, pressed it a few times, re-connected it and it worked at treat. So re-installed it and.....bugger no light! Checked bike in neutral (all the way down and one click up, hey presto neutral), no light, sensor out re-connected it, light working....mmmmm!
Thought to self I wonder if I started bike on paddock stand, ran in gear back into neutral and it magically sorts itself out. So fitted swing arm back, chain, rear wheel....off we go!!!!! No poxy neutral light!
Again checked crossing wires out of sensor and the light comes on.....just about the same time the light came on in my walnut sized brain......gears...all the way down and one up? I am running race pattern!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Clicked the lever all the way up and one down, light came on sright away.
So if you see me with a spanner in my hand, in my tool box you will find a large rubber mallet.....you know what to do!
Reply
Old 15-Dec-2013, 09:33   #5
Ghost Ghost is offline
Registered Forum User
Big Twin
Bikes: Ducati 749, Phil Read Replica, DD 620
Ghost's Avatar
 
Posts: 1,830
Join Date: Mar 2008
Location: Coventry
Mood: 2011 DD Class 'B' Champion
Still makes me laugh reading it the second time around Mark. :-)
Reply
Old 15-Dec-2013, 15:13   #6
Yogi Yogi is offline
Registered Forum User
Yogi's Avatar
 
Posts: 46
Join Date: Oct 2012
Location: Chesterfield
That's brill, it's so easy to go chasing off after a fault.

The first rule of fault finding is to sit down and have a cup of tea, and give the problem a good coat of thinking through.

Mind you it's a bit different fault finding after the first call for line up
Reply
Old 18-Dec-2013, 11:32   #7
DSC Region Organiser skidlids skidlids is offline
MotoGP God
skidlids's Avatar
 
Posts: 18,275
Join Date: Apr 2002
Location: Oxford
Mood: Its ONLY a Bike Club
Nice one Mark, the amusement factor is worth every penny

As for the Neutral light, I quite like mine as it's built into my main ON/OFF switch

As for the oil light as I keep asking Dallas,
"knowing what you do about Ducati oil pressure switches, if you were in chance of winning the race and the oil light came on would you stop?"

Blank them is often the safest option


Checkout the Desmo Due Paddock on Facebook
Reply
Old 17-Dec-2013, 22:13   #8
DSC Member badgerpilot badgerpilot is offline
DSC Club Member
500SD
Bikes: Badger DD A #50, Aprilia Tuono 1100rr
badgerpilot's Avatar
 
Posts: 757
Join Date: May 2009
Location: Stockport
Mood: More chilled than a polar bear's d**k
Quote:
Originally Posted by Ghost
Same as the oil light, are you going to pull over or stop mid race because the light comes on.

I did at Pembrey!


It's not the size of the dog in the fight that matters, but the size of the fight in the dog.
Scott #50
Reply
Old 18-Dec-2013, 08:19   #9
yendor yendor is offline
Registered Forum User
Montjuic
 
Posts: 76
Join Date: Sep 2011
Quote:
Originally Posted by badgerpilot
I did at Pembrey!


Scott it was a tad more than the oil light made you pull over.
Reply
Old 18-Dec-2013, 21:09   #10
DSC Member badgerpilot badgerpilot is offline
DSC Club Member
500SD
Bikes: Badger DD A #50, Aprilia Tuono 1100rr
badgerpilot's Avatar
 
Posts: 757
Join Date: May 2009
Location: Stockport
Mood: More chilled than a polar bear's d**k
Quote:
Originally Posted by yendor
Scott it was a tad more than the oil light made you pull over.

Apart from going round Honda like Peter Collins I had no idea I had trouble till the light came on and the penny dropped.
If it hadn't I would've gone into the hairpin as normal (assuming the engine didn't throw it's hand in) and that could've been quite nasty.


It's not the size of the dog in the fight that matters, but the size of the fight in the dog.
Scott #50
Reply
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 19:22.