| |
 13-Sep-2004, 15:55 | #1 |
| I've got the AJR carrier, get some loctite too if you go with this  resetting the ride height isn't too challenging as long as you have the right tools ( heat gun was used a lot to loosen things off!!), take your time, and take a measurement before you do the sprocket change to set it back to with the new sprockets. I did this in conjunction with the guide on Section8's site. My recommendation of 40 teeth was based on the fact that I'd forgotten the R runs a smaller rear than the rest of the 748's. Although some say a 10% change is needed to feel the benefit, it really depends on what you want to achieve as each track may require different gearing. | |
Hybrid Mode
