Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Clutch not engaging

[simonducati]

i had a similar problem, try taking out all the Springs and make sure that the plate is definitely with in the groove slot touching the clutch plates, then make sure you screw the springs all the way down.

[MonkeyBoy]

Hi Simon,
I took several of the plates out and aligned them again ..even though none of the plates had been taken out...just the springs removed. All then worked. Perhaps a plate had slipped out a bit but thankfully all working now with the new springs.

A good suggestion to check it all again...next time I will check and check again!
Time to take it out for a test ride I think!
Thanks.
Alec

[simonducati]

im happy you have got it going as the weather is getting better and it would be a shame to miss out on this weekend!
Take it easy on that test ride...