Ducati Sporting Club UK
DesmoDue - General Questions and Chat
Discussions on the race series devised and supported by the DSC.
 
 
Thread Tools Search this Thread Display Modes
Prev   Next
  #7  
Old 18-May-2014, 15:09
bally71's Avatar
DSC Member bally71 bally71 is offline
DSC Club Member
Mille
Bikes: 620SS Desmo Due 800SS Minitwin 1000SS Monster 750
 
Posts: 391
Join Date: Apr 2008
Mood: Inquisitive cat
Quote:
Originally Posted by milesaway
worth checking valves first- if clearances are out enough can loose compression- if they are its as easy to pull off the heads then you can grind them in before you set clearances and can check state of bores and measure rings at the same time

cheers miles .. but I've planned to change the motor anyway

Nice fresh motor .. should be all up and running ready for Donington

Can't wait .. the old motor was only making 50 odd horses ... I won't be able to control the thing with an extra 10 ....
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 23:47.