Registered Forum User
500SD
Bikes: 999 Mono/1198S
Posts: 803
Join Date: Jun 2002
Location: Yorkshire
Mood: Messing with diagnostics
Clutch
Which part are you on about? See attachment.
Have you got the mark on the clutch plate lined up with the post with the horizontal mark? When I replaced my clutch plate I found that I could not release the clutch with the clutch lever. By slackening off the clutch springs and applying the clutch lever I found that the plate would move and then I was able to tighten up all the cluch springs. They look like then are fully compressed when tightened but that is how they function.
Threaded Mode