ride height adjuster

smilo006 · 14-Jan-2005, 13:27

Getting pretty tired of the std ride height adjuster, difficult to get at propoerly and made of Italian cheese. Thought about changing it for one from Casoli or Tecmoto (seem to be the same). Any suggestions of replacements? (other than the very trick JHP one).

rcgbob44 · 14-Jan-2005, 13:49

Have you tried Dutch or German cheese instead?

Harv748 · 14-Jan-2005, 13:52

Thought about one myself...AJ Racing was doing them for £30 incVAT during his sale. Don't know if he still is.

With the adjustment being made via the hex bit on the middle of the rod, it should make life easier, but i guess you'll still need to undo/redo the locking nuts each time.

andyb · 14-Jan-2005, 14:01

For the sake of removing the left foot peg, its allmost worth taking the rod off to adjust. You can also measure its length more accurately then.

Or if you have the coorect datum tool, take it off undo and refit before adjusting using the tool.

keefer · 14-Jan-2005, 16:07

how the hell can you remove it without taking the pin that holds the shock in place on the swingarm, and the rocker arm at the top of the
ride height adjuster

rcgbob44 · 14-Jan-2005, 16:08

Try Fast by Ferrachi

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

14-Jan-2005, 13:49	#2
rcgbob44 Registered Forum User BSB Star Bikes: 998s, Jota, KTM 690 Duke Posts: 5,990 Join Date: May 2003 Location: Coulsdon, Surrey...........and hopefully Germany at some point in the future. Mood: My Jota goes rumpety rump! & I have my wife exactly where she wants me! Have you tried Dutch or German cheese instead? Reply

14-Jan-2005, 13:52	#3
Harv748 Registered Forum User Big Twin Posts: 1,882 Join Date: May 2002 Thought about one myself...AJ Racing was doing them for £30 incVAT during his sale. Don't know if he still is. With the adjustment being made via the hex bit on the middle of the rod, it should make life easier, but i guess you'll still need to undo/redo the locking nuts each time. Reply

14-Jan-2005, 16:07	#5
keefer Registered Forum User Ducati Meccanica Posts: 2,518 Join Date: Jul 2004 Location: hants Mood: Found a CR250. Let the bone braking begin how the hell can you remove it without taking the pin that holds the shock in place on the swingarm, and the rocker arm at the top of the ride height adjuster Reply

14-Jan-2005, 16:08	#6
rcgbob44 Registered Forum User BSB Star Bikes: 998s, Jota, KTM 690 Duke Posts: 5,990 Join Date: May 2003 Location: Coulsdon, Surrey...........and hopefully Germany at some point in the future. Mood: My Jota goes rumpety rump! & I have my wife exactly where she wants me! Try Fast by Ferrachi Reply