Ducati Sporting Club UK > For Sale / Wanted > Private Adverts > 996 track bike with some goodies on it

[zxrjohn14]

ok, i am thinking of selling my 996, so seeing if there is any interest on here. frame and engine numbers there, v5 in my name (somewhere, i have misplaced it but will get one from the dvla if it doesn't turn up).
it has:
ohlins r+t forks with radial bottoms
performance technology calipers
ohlins rear shock
carbon swingarm cover with chainguard
magura master cylinder
jhp slave cylinder
magnesium wide track yokes
marchesini 17" wheels with pfm discs
standard spare wheels with brembo discs and nearly new wets
pp tuning bars
corse rearsets
sp quickshifter in race (its the lever only type)
carbon/kevlar body work
air filters that clip over velocity stacks
samco hoses
jtr corse slipper clutch with new plates, spider spring, bearing etc
aluminium subframe
kevlar larger airscoops
new belts fitted and serviced only 100 miles/ 3months ago
there's probably more but thats all i can remember for now.

i value it around the £5k mark

only ask for 'pics' if seriously interested.

may part ex for cbr1000rr or similar, let me know what you have to part ex
wouldn't be interested in a £15k bike, only something of similar value.
thanks
would be best to pm me with what you have

[zxrjohn14]

may break if enough interest

[zxrjohn14]

here's a list oif what i would like for the bits.
the bike will not be broken until its financially viable to do so. so if there is anything you want let me know.
tank and pump £100
rear ohlins shock £250
front ohlins forks with radial bottoms £800
magnesium triple clamp yokes £500
engine with new belts and service £1000
frame with v5 £400
polished 50mm termignoni exhaust system with titanium cans £450
marchesini wheels with cast iron discs £450
brembo wheels with very good wets and aftermarket brembo discs £325
marchesini rear £200
front brembo wheel with a very small kink in it £60
corse rearsets in road or race pattern (new) £175
sp electronics race shift quickshifter £250
loom and ecu £100
power commander III £120
performance technology calipers with new ap pads £300
magura master cylinder (same as a brembo) £120
clocks £100
jhp slave cylinder £75
smt crank case breather (red) £65
black samco hoses £70
radiator £50
carbon/kevlarrace fairing £200 (carbon bellypan is exposed carbon)
carbon mudguard (sprayed black) £30
pp tuning bars £50
larger kevlar air tubes (exposed weave) £100

i would do the whole front end, forks, yokes, spindle, bars, calipers, mudguard for £1500

any interest call me on zero7805 six 034two 4

done the number like that as last time i put my number on the net i got 60 calls in 1 day from some muppets trying to say i was entitled to some pp claim even though i have never had any.
all prices would be plus post
cheers
john

[zxrjohn14]

had some interest in many items now, so 90% sure this will be broken.
pictures can be found here
http://ducatiforum.co.uk/f20/possibl...ack-bike-3590/

[Quarrybends]

poss interested in the rad, got any pics mate? ;-)

Also could i part ex a tea strainer and a loan ranger mask?

[zxrjohn14]

Have you got the sheriff's badge to go with the mask?