Rockers!

Walenut · 02-Mar-2005, 22:59

Nice bit of rocker wear

http://cgi.ebay.co.uk/ws/eBayISAPI.d...ayphotohosting

Delooney · 02-Mar-2005, 23:00

How many miles they done ?

Delooney

Walenut · 02-Mar-2005, 23:06

OOOOOOOOOh at least a couple of hundred

Delooney · 02-Mar-2005, 23:09

I'll bid, oooh - 21pence for them !

Delooney

Mr_S · 03-Mar-2005, 00:18

Considering that they're £60 - 100/rocker new (when vat and the likes added) it may be worth a bid if you've a head service coming up.

Could be a just in case purchase...

I saved a fortune by buying a set of complete heads off ebay earlier this year as I had every rocker replaced, all 16 of 'em during the head rebuild last month.

Walenut · 03-Mar-2005, 20:46

Yes I've been keeping that in mind since I read your post.

Mr_S · 03-Mar-2005, 22:56

Bearing in mind that I sold off all the other bits of the heads left over after the strip, the rockers for my rebuild cost me less than a fiver each

Bargain.

Only problem was, while it was in bits I had a load of other work done too. Kind of wiped out the saving...

MrWestys748 · 04-Mar-2005, 09:54

Can you get the rockers replated...? if so where and how much does it cost....?

Walenut · 04-Mar-2005, 10:02

Do a search on rockers mate and I think you will come up with all the information you require

Walenut · 04-Mar-2005, 10:04

Quote:

Originally posted by Mr_S
Bearing in mind that I sold off all the other bits of the heads left over after the strip, the rockers for my rebuild cost me less than a fiver each

Bargain.

Only problem was, while it was in bits I had a load of other work done too. Kind of wiped out the saving...

Life savings?

[Edited on 4-3-2005 by S.P]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

02-Mar-2005, 22:59	#1
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Rockers! Nice bit of rocker wear http://cgi.ebay.co.uk/ws/eBayISAPI.d...ayphotohosting Reply

02-Mar-2005, 23:00	#2
Delooney Registered Forum User Mille Posts: 102 Join Date: Nov 2004 Location: Alfreton, Derbyshire Mood: Just the one bike for me now How many miles they done ? Delooney Reply

02-Mar-2005, 23:06	#3
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic OOOOOOOOOh at least a couple of hundred Reply

02-Mar-2005, 23:09	#4
Delooney Registered Forum User Mille Posts: 102 Join Date: Nov 2004 Location: Alfreton, Derbyshire Mood: Just the one bike for me now I'll bid, oooh - 21pence for them ! Delooney Reply

03-Mar-2005, 20:46	#6
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Yes I've been keeping that in mind since I read your post. Reply

03-Mar-2005, 22:56	#7
Mr_S Registered Forum User Big Twin Posts: 1,324 Join Date: Mar 2004 Location: Gosport Bearing in mind that I sold off all the other bits of the heads left over after the strip, the rockers for my rebuild cost me less than a fiver each Bargain. Only problem was, while it was in bits I had a load of other work done too. Kind of wiped out the saving... Reply

04-Mar-2005, 09:54	#8
MrWestys748 Registered Forum User Montjuic Posts: 66 Join Date: Jul 2004 Location: Sussex Can you get the rockers replated...? if so where and how much does it cost....? Reply

04-Mar-2005, 10:02	#9
Walenut Registered Forum User Mille Posts: 339 Join Date: May 2002 Location: Black Country Mood: Erratic Do a search on rockers mate and I think you will come up with all the information you require Reply