torque settings

adam · 19-Mar-2005, 10:22

where can i find torque settings for all nuts/bolts for a 996R.

Felix · 19-Mar-2005, 10:43

Surely, someone will be along with the workshop manual. If you can't get any joy, I have all the torque settings for the 996RS, although some bolts will be different sizes.

Mr_S · 19-Mar-2005, 10:49

http://www.ducati.com/bikes/tech.jht...FFAKFUIH UIV4

Scroll to the bottom for the main values.

adam · 19-Mar-2005, 10:54

Ah felix to the rescue, im after Rear Sprocket, Sprocket Carrier Nuts, Front Sprocket. These for now please.

Felix · 19-Mar-2005, 11:14

[list=1][*]Rear sprocket: explain[*]Sprocket carrier nuts (cush drive retaining nuts?): M10x1.25, 44 Nm (grease flange)[*]Front sprocket: M5x0.8, 8 Nm, Loctite 242[/list=1]

[Edited on 19-3-2005 by Felix]

adam · 19-Mar-2005, 13:23

sorry Felix rear sprocket nut the, large one. would you have the ones for the nuts that hold the sprocket to the carrier. Thanks.

Felix · 19-Mar-2005, 13:47

Don't know the large nut as it's even larger on the RS. The nuts that hold the sprocket to the carrier are the cush drive retaining nuts, unless you have quick change sprocket carrier, in which case I don't know.

Here is a complete list, but beware of the thread size differences to road bike.

[Edited on 19-3-2005 by Felix]

neil748r · 19-Mar-2005, 14:52

Adam,

Hope this helps mate (see attached).

Use a light smear of molybdenum disulphide grease on the threads and back face of the nuts.

Cheers, Neil

Totto · 19-Mar-2005, 15:46

Do a search under my user name as i have posted the 996r/testa workshop manual online
Thought ever one would have it by now ,but its out there somewhere , would look for it myself but i have just worked a 15 hour nightshift

adam · 19-Mar-2005, 18:21

many thanks, just happened to tear off one of the renthal carries bolts, just wasnt paying attention and bo**ox. So now have to locate a new bolt. not any old bolt but a special one. Bo**ox. Got to have it during next week. Anyone know where to get one? has anyone here got one until i can replace it?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

19-Mar-2005, 10:22	#1
adam Registered Forum User Big Twin Posts: 1,154 Join Date: Jun 2001 Location: Biggleswade, bedfordshire Mood: happy torque settings where can i find torque settings for all nuts/bolts for a 996R. Reply

19-Mar-2005, 10:43	#2
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? Surely, someone will be along with the workshop manual. If you can't get any joy, I have all the torque settings for the 996RS, although some bolts will be different sizes. Reply

19-Mar-2005, 10:49	#3
Mr_S Registered Forum User Big Twin Posts: 1,324 Join Date: Mar 2004 Location: Gosport http://www.ducati.com/bikes/tech.jht...FFAKFUIH UIV4 Scroll to the bottom for the main values. Reply

19-Mar-2005, 10:54	#4
adam Registered Forum User Big Twin Posts: 1,154 Join Date: Jun 2001 Location: Biggleswade, bedfordshire Mood: happy Ah felix to the rescue, im after Rear Sprocket, Sprocket Carrier Nuts, Front Sprocket. These for now please. Reply

19-Mar-2005, 11:14	#5
Felix Registered Forum User Ducati Meccanica Posts: 2,467 Join Date: Dec 2001 Location: North Yorkshire Mood: Is 112 dB loud enough?? What?? [list=1][]Rear sprocket: explain[]Sprocket carrier nuts (cush drive retaining nuts?): M10x1.25, 44 Nm (grease flange)[*]Front sprocket: M5x0.8, 8 Nm, Loctite 242[/list=1] [Edited on 19-3-2005 by Felix] Reply

19-Mar-2005, 13:23	#6
adam Registered Forum User Big Twin Posts: 1,154 Join Date: Jun 2001 Location: Biggleswade, bedfordshire Mood: happy sorry Felix rear sprocket nut the, large one. would you have the ones for the nuts that hold the sprocket to the carrier. Thanks. Reply

19-Mar-2005, 14:52	#8
neil748r Registered Forum User 500SD Posts: 554 Join Date: Jun 2003 Adam, Hope this helps mate (see attached). Use a light smear of molybdenum disulphide grease on the threads and back face of the nuts. Cheers, Neil Reply

19-Mar-2005, 15:46	#9
Totto Registered Forum User Big Twin Posts: 1,262 Join Date: Jul 2002 Location: Northern Ireland Mood: Not so broke any more !!!!!!!! Do a search under my user name as i have posted the 996r/testa workshop manual online Thought ever one would have it by now ,but its out there somewhere , would look for it myself but i have just worked a 15 hour nightshift Reply