Will ST wheels fit a 900ss?

mherman · 28-Apr-2013, 21:42

Does anyone know if these wheels will fit a 1999 900ss? Thanks, Mike http://www.ebay.co.uk/itm/3008931845... 4.m1438.l2649

skidlids · 28-Apr-2013, 21:45

Rear Spindle size is different
17mm on the 900SS
25mm on the ST

mherman · 28-Apr-2013, 21:58

Thank you very much .. super fast advice!

skidlids · 28-Apr-2013, 22:00

I've been working on Monsters and Supersports most of the weekend
the later Monsters such as the 620, 800 and 1000 share the same 25mm rear spindle as the STs but the 620 and 800 use a 4.5" Rim width

skidlids · 28-Apr-2013, 22:04

Here is one that apparently that has been modified, but the bearings will soon collapse without a centre spacer

http://www.ebay.co.uk/itm/Ducati-ST2...em3a80b f8da9

The Bobster · 29-Apr-2013, 17:55

Hi Guys, thats my ST2 wheel for sale on evil bay. I bought it for my '94 900ss, it fitted but the chain was out of alignment and the pads dragged on the disc as if not in line. I bought the correct 900ss whel and it is all fine. This wheel would fit better with a bit of machining.

Bob

skidlids · 29-Apr-2013, 22:14

Talking to my mate Mickb earlier tonight he has a 900SS rear wheel complete with disc and sprocket carrier that he no longer needs.

he's registered on the forum so he may be along in a while with an advert for it

Iconic944ss · 30-Apr-2013, 01:16

Large axle fronts wheels can be modded quite easily using stock ducati parts, i have a wide axle Marchi sleved down on my 900ss.

Rears however, just as in women are a completely different issue

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

28-Apr-2013, 21:42	#1
mherman Registered Forum User Bikes: Ducati Cafe Racer, Ducati ST3, Posts: 23 Join Date: Nov 2004 Location: Surrey Will ST wheels fit a 900ss? Does anyone know if these wheels will fit a 1999 900ss? Thanks, Mike http://www.ebay.co.uk/itm/3008931845... 4.m1438.l2649 Reply

28-Apr-2013, 21:45	#2
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Rear Spindle size is different 17mm on the 900SS 25mm on the ST Checkout the Desmo Due Paddock on Facebook Reply

28-Apr-2013, 21:58	#3
mherman Registered Forum User Bikes: Ducati Cafe Racer, Ducati ST3, Posts: 23 Join Date: Nov 2004 Location: Surrey Thank you very much .. super fast advice! Reply

28-Apr-2013, 22:00	#4
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club I've been working on Monsters and Supersports most of the weekend the later Monsters such as the 620, 800 and 1000 share the same 25mm rear spindle as the STs but the 620 and 800 use a 4.5" Rim width Checkout the Desmo Due Paddock on Facebook Reply

28-Apr-2013, 22:04	#5
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Here is one that apparently that has been modified, but the bearings will soon collapse without a centre spacer http://www.ebay.co.uk/itm/Ducati-ST2...em3a80b f8da9 Checkout the Desmo Due Paddock on Facebook Reply

29-Apr-2013, 22:14	#7
skidlids MotoGP God Posts: 18,275 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club Talking to my mate Mickb earlier tonight he has a 900SS rear wheel complete with disc and sprocket carrier that he no longer needs. he's registered on the forum so he may be along in a while with an advert for it Checkout the Desmo Due Paddock on Facebook Reply

30-Apr-2013, 01:16	#8
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Large axle fronts wheels can be modded quite easily using stock ducati parts, i have a wide axle Marchi sleved down on my 900ss. Rears however, just as in women are a completely different issue Reply