Sprocket covers and clutch covers

loverobot · 27-Oct-2005, 16:34

I have seen somewhere 'migliore'? sprocket covers which are basically the same colour as the engine but are open in design - i have lost the link - can anyone help>?

Also I am after a similar colour open clutch cover - I have seen the speedymoto ones whcih mimic the 5 spoke marchenisis - any1 able to assist with what the colour looks like in the flesh as I dont want it to look too blinging!

Thanks

TP · 27-Oct-2005, 16:39

Quote:

Originally posted by loverobot
Also I am after a similar colour open clutch cover - I have seen the speedymoto ones whcih mimic the 5 spoke marchenisis - any1 able to assist with what the colour looks like in the flesh as I dont want it to look too blinging!

Thanks

I have this one on my bike, it looks good I reckon. It's not *quite* a match on the frame colour etc because it's almost a mirror type finish.

But IMO, it's not over the top type bling or anything like that. It looks good, does it's job and I like it

Go for it

My sprocket cover is carbon, so I can't help you on that front.

loverobot · 27-Oct-2005, 16:44

TP - did you get yours from cornerspeed? they dont put the prices up that i can see...

TP · 27-Oct-2005, 16:45

Quote:

Originally posted by loverobot
TP - did you get yours from cornerspeed? they dont put the prices up that i can see...

I certainly did, Nelly is the man!

Although I can't remember how much it cost me - it was a wanton, lust-filled moment

loverobot · 27-Oct-2005, 16:46

cheers! I have many of those moments - mid life crisis according to my better half lol

Rushjob · 27-Oct-2005, 17:16

I think they run at about £150 and the clutch plates £135 or was it the other way round... who knows???
I keep seeing them at Nellys but am currently managing to resist......
I don't hold out much hope though & can see the Marchi style one ending up on the ST

loverobot · 27-Oct-2005, 17:21

cover first then clutch plate me thinx
expense expense !

nelly · 27-Oct-2005, 23:57

£135 for the covers and £150 for the plates................

electricsheep · 27-Oct-2005, 23:59

the speedmoto covers from nelly are outstanding and of course nelly is 'the man'

loverobot · 31-Oct-2005, 11:29

I have gone for a migliore sprocket cover and looks the dogs - the bolts that held the original in place were too long though - any1 know of a source for decent shortish bolts or are the metal spacers that are in the original plastic unit removeable with force?!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

27-Oct-2005, 16:44	#3
loverobot Registered Forum User 500SD Posts: 723 Join Date: Aug 2005 Location: leeds TP - did you get yours from cornerspeed? they dont put the prices up that i can see... Reply

27-Oct-2005, 16:46	#5
loverobot Registered Forum User 500SD Posts: 723 Join Date: Aug 2005 Location: leeds cheers! I have many of those moments - mid life crisis according to my better half lol Reply

27-Oct-2005, 17:16	#6
Rushjob Registered Forum User Big Twin Posts: 1,802 Join Date: Apr 2002 Location: Lincs Mood: :-) I think they run at about £150 and the clutch plates £135 or was it the other way round... who knows??? I keep seeing them at Nellys but am currently managing to resist...... I don't hold out much hope though & can see the Marchi style one ending up on the ST Reply

27-Oct-2005, 17:21	#7
loverobot Registered Forum User 500SD Posts: 723 Join Date: Aug 2005 Location: leeds cover first then clutch plate me thinx expense expense ! Reply

27-Oct-2005, 23:57	#8
nelly Registered Forum User Ducati Corse Posts: 3,134 Join Date: Jan 2002 Location: notts Mood: Bloo and Yellow.. and Red now ;) £135 for the covers and £150 for the plates................ Reply

27-Oct-2005, 23:59	#9
electricsheep Registered Forum User Big Twin Posts: 1,037 Join Date: May 2003 Location: Reading Mood: Diet the speedmoto covers from nelly are outstanding and of course nelly is 'the man' Reply

31-Oct-2005, 11:29	#10
loverobot Registered Forum User 500SD Posts: 723 Join Date: Aug 2005 Location: leeds I have gone for a migliore sprocket cover and looks the dogs - the bolts that held the original in place were too long though - any1 know of a source for decent shortish bolts or are the metal spacers that are in the original plastic unit removeable with force?! Reply