Steering Damper Bearing!

rcgbob44 · 30-Mar-2004, 23:11

Does anyone out there know where I can buy an "offset spherical rod end bearing" like wots fitted to the dampers on 749/999 dukes.

Any advice would be appreciated b4 I try and e mail Mr Ohlins

stu 748 · 31-Mar-2004, 20:04

cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ?

stu 748 · 31-Mar-2004, 20:04

cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ?
regards
stu

Jon · 31-Mar-2004, 21:30

Give Ktech or Kais Ohlins a bell.

Iconic944ss · 01-Apr-2004, 07:39

Just take it all along to a local bearing stockist (Industrial or otherwise or possibly a Fastners stockist). They sell all sorts of good stuff in there these days as they have such diverse markets to try and satisfy!

rcgbob44 · 01-Apr-2004, 22:31

not quite as easy as that Frank, if you look at the damper rod on a 749/999 you will see that where it bolts to one of the two mounting points , it is offset, not straifgt as on a 916 series duke.
Spose i hadbetter contac Ohlins.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

31-Mar-2004, 20:04	#2
stu 748 Registered Forum User Mille Posts: 100 Join Date: Jan 2004 Location: Hastings,East sussex steering damper cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ? Reply

31-Mar-2004, 21:30	#4
Jon Registered Forum User Ducati Corse Posts: 3,921 Join Date: Jun 2001 Location: Drayton Bassett, Staffs Mood: Tad more confident Give Ktech or Kais Ohlins a bell. Reply

01-Apr-2004, 07:39	#5
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,795 Join Date: Oct 2002 Location: north east Just take it all along to a local bearing stockist (Industrial or otherwise or possibly a Fastners stockist). They sell all sorts of good stuff in there these days as they have such diverse markets to try and satisfy! Reply