Ducati Sporting Club UK > DesmoDue Race Series > DesmoDue - General Questions and Chat > exhaust rebuild

[rossco572]

as the first part of my exhaust system rebuild, i would like to remove the baffles etc from my standard cans, any got a link to a how to site as my searches have all been in vain! specifically would like to know how much of the perforated centre pipe to remove and do you lightly wrap on rebuild

[dunlop0_1]

I have just done this mod on Louise's (mrsmonster) class B bike. It is easy enough to do but cutting off that lastt little bit of pipe took a while and lots of dremmel grinding discs. The bike sounds like a Ducati now but probably now power difference.

I did it working from inside the end of the can without taking the tube off which saved a lot of grinding and no welding back together.
I also cut a small V out of the inlet pipe bent it up and had it welded so the exhaust is more upswept.

http://www.ducatisuite.com/mufflers.html

Hope this helps.

[skidlids]

Try this one Ross
http://www.ducatisuite.com/performancemods.html