Forks alordy

bally71 · 28-Feb-2016, 13:03

Can some one confirm for me that the ST forks work ok on the ss .. i bought them for the monster but since i'm sticking with the ss now and my current ones are pitted to buggery from riding through gravel traps, i thought i'd use them.

They will be going off to maxton to get fettled first so no worries about springs .. just wanted to make sure there's nothing i've not considered.

antonye · 28-Feb-2016, 15:01

Yes, they are the same diameter so will fit. They're just a bit longer so you'll need to put them through the yokes a bit to take this into account and setup your ride height properly.

bally71 · 28-Feb-2016, 16:43

Cheers Antony but the ST forks are 40mm shorter not longer

Well the ones i have are ...

skidlids · 28-Feb-2016, 16:56

Quote:

Originally Posted by bally71

Cheers Antony but the ST forks are 40mm shorter not longer

Well the ones i have are ...

All ST and Monster forks are shorter than the SS versions as the SS bikes have the bars clamped to the top of the fork above the top yoke

paynep · 28-Feb-2016, 18:22

I've just changed from SS to ST in my bike. I used the ST internals with my SS springs, just with the preload spacers 40mm shorter in total.
Everything seems to have set up fine but I wont know for sure until Brands....

bally71 · 28-Feb-2016, 18:32

Cheers guys

Yes my ss forks where 45mm above the yoke.

40mm is standard i think plus i dropped them 5mm to sharpen it up.

The ST forks seem perfect .. it's as if ducati knew.

badgerpilot · 02-Mar-2016, 12:39

Forks, are they the boingy tube things with a wheel at the end?

bally71 · 02-Mar-2016, 19:31

Quote:

Originally Posted by badgerpilot

Forks, are they the boingy tube things with a wheel at the end?

In your case mate they are the pointy sharp things with sausages on the end

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

28-Feb-2016, 16:43	#3
bally71 DSC Club Member Mille Bikes: 620SS Desmo Due 800SS Minitwin 1000SS Monster 750 Posts: 391 Join Date: Apr 2008 Location: Wirral Mood: Inquisitive cat Cheers Antony but the ST forks are 40mm shorter not longer Well the ones i have are ... Reply

28-Feb-2016, 18:32	#6
bally71 DSC Club Member Mille Bikes: 620SS Desmo Due 800SS Minitwin 1000SS Monster 750 Posts: 391 Join Date: Apr 2008 Location: Wirral Mood: Inquisitive cat Cheers guys Yes my ss forks where 45mm above the yoke. 40mm is standard i think plus i dropped them 5mm to sharpen it up. The ST forks seem perfect .. it's as if ducati knew. Reply

02-Mar-2016, 12:39	#7
badgerpilot DSC Club Member 500SD Bikes: Badger DD A #50, Multistrada 1200s, Aprilia Tuono 1100rr Posts: 756 Join Date: May 2009 Location: Stockport Mood: More chilled than a polar bear's d**k Forks, are they the boingy tube things with a wheel at the end? It's not the size of the dog in the fight that matters, but the size of the fight in the dog. Scott #50 Reply