 |
| | |||||||||||||||||||||||||||
| | Thread Tools | Search this Thread | Display Modes |
| #1  20-Nov-2005, 10:10 | |||
| |||
| Why have these been cut...... As i have stripped it down for the header tank to be replaced and give bike a good clean up i noticed that both air intakes have been cut so they fit flush against the top fairing...Why would this need to be done  Is there different ones available as in sizes etc mines a 2000 748bip its running airbox filter instead of intake filters....part no. on it is 442.1.015.1a and has a sticker above it with e3c950.235 any ideas was gonna fit carbon ones but not sure now if ive got to cut them as well Simon  |
Threaded Mode