Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 851 / 888 > i'm hoping i know....but?

[loony888]

would anybody have a pair of the carbon fibre plates that zip tie to the front of the frame for use with a c/f airbox???
any help would be greatly appreciated,
cheers.
paul.

[Iconic944ss]

I sadly, dont know an 888 that intimately but, I do know that some places sell sheets of Carbon Fibre - difficult to cut and even more so to shape but could be an alternative?

Frank

ps - I'm sure Jasper or someone from the T8 mob will be along soon....

[851neil]

think I might have a set floating around the garage - I'll take a look tonight and let you know.
cheers

Neil

[851neil]

Paul, due to a couple of home issues last night (pesky kids) I didn't get the chance to look - will be out there tonight though and will get back to you.
cheers

Neil

[loony888]

youdaman!!
thanks heaps neil.

[851neil]

Paul, just checked - I have a spare carbon plate for the LHS and not the right, this as the RHS plate is a part of the carbon X tube air intake that bolts in front of the headstock.
Let me know if you need the LHS plate.
cheers

Neil

[phil911]

Loony888 should take both parts ...

These parts are difficult to find now. I'm always "investigating" to get a couple from Europe, but the opportunities are very very rare.
With the LHS used as a mould, it suddenly becomes easy to make the opposite part.

Original parts perfectly fit the top and low tubes of the frame and have an openig excrescence on the front ...

Seen from the screen :

[phil911]

I'm angry with the size of my pics ...
Sorry

Phil911

[Iconic944ss]

Image resizing:

http://www.ducatisportingclub.com/fa...new_faq_item42

Image resizer is very good!

Frank

[phil911]

Thanks Frank !!!

Phil911