 |
| | |||||||||||||||||||||||||||
| | Thread Tools | Search this Thread | Display Modes |
 10-May-2005, 20:23 | #9 |
| Registered Forum User 500SD  Posts: 631 Join Date: Aug 2003 Location: Germany, 3 hours from the ring.. Mood: head down i did mine myself using the parts shown below. the original cable was shortened and the plastic 90 deg bend was cut off. i then used an adjuster from a mountain bike cable ( same size) and the 996 throttle assy i messured the freeplay needed and then attached a new nipple to the cable . bingo job done cost about 40 bucks. the harder question to answer is did it make the bike better...... pros- less hand movment to required to go from closed to fully open cons- i felt the fine feel i had with the throttle when passing the apex was a little lost ,ie it was all or nothing ,i played with the freeplay but made no difference in the end i think you should not listen to me, but try it youreself  | |
Threaded Mode