Registered Forum User
Big Twin
Bikes: 916SPS Ratbike + 749R Shed
Posts: 1,030
Join Date: Jun 2001
Location: West Sussex
Mood: Ugly girls (749) are more dirty.....
Antonye,
I fitted an oil cooler to my 748 a few years back.
Parts required:
Oil cooler
Hoses
"Spring Plate" that fits between the oil filter and the crankcase (this directs the oil into the cooler - without it the cooler doesn't work. Costs about a fiver)
Crankcase pickup/return fittings.
Also, need to re-route the oil return line tfrom the existing rear head line to pick up on the cooler rather than back to the crankcase. The end fitting should be changed to do this but I managed to reuse the crankcase fittings and get it to mate with the cooler.
Threaded Mode