 17-Oct-2005, 11:29 | #4 |
| Spank I have been having trouble with the 749R mine has been cutting out at slow speed (filtering for example). I complained directly to Ducati who have agreed to re-set the fueling (CO2 between cyclinders e.t.c.), this has been done twice now and it still happens  Something strange is that most occassions i pull the clutch in and it fires up but on at least two occassions I have had to coast to a stop put her in neutral and then fire her up. Mine I am guessing is something more than just set up and I will be contacting the dealer again today (the dealer has been great by the way "Woods"). Being a control sysems engineer I would luv to know what processor Ducati use and the cycle times they are using for the software because I personally think this could be a more software/hardware problem. Also a point of note, I am aware the datatool 3 alarms can cause problems if not mounted correctly (vibration) resulting in what appears like early activation of the rev limiter. My bike use's the meta alarm. Regards DaveO | |
Threaded Mode