| Its a doddle mate.
Sides off first.
Two screws underneath.(4mm allen),...oh, one if its an early bike.
Four dzus fasteners (half turn) and one side is off.(can be tight on the peg near the headlight.'05 bikes have a threaded screw by the headlight,earlier bikes have the dzus.
Now remove the other side.
Now for the nose cone.Remove the rubber bungs in the fairing stays.Disconnect the wiring for the indics.
Remove the retaining screw for the mirrors.(3mm?)
Pull the mirrors away from the fairing and withdraw the wiring.
Two more bolts,(4mm) near the nose and its off.Just mind the running light wiring as you remove the nose.Should take about 5 mins. | 
Threaded Mode