Registered Forum User
Ducati Corse
Posts: 3,134
Join Date: Jan 2002
Location: notts
Mood: Bloo and Yellow.. and Red now ;)
Before you go looking at calipers, check the mounting centres. There are 2 sizes, 40mm and 65mm. The 4 pad calipers are 65mm.
You can get plates made up to adapt them, but personally i'm not a fan.
If you are running 40mm calipers, then a set of Bendix MF compound pads and a radial master cylinder will help no end. Braided lines would be a good idea if you still have rubber lines. They will improve the feel but apart from that your rubber lines will be well past the sell by date.
In fact if you have rubber lines, then i'm 100% sure you'll have 40mm calipers.
Hybrid Mode
