 15-May-2006, 10:56 | #14 |
| Registered Forum User Mille Bikes: Ducati 999, BSA A65 Lightning, Matchless G80s  Posts: 390 Join Date: Mar 2004 Location: Chelmsford, Essex Mood: Fed up with DIY! Picture 2 Thats better  After diconnecting the relay I could see that water had been getting in from the white crud around the contacts (picture 2). I cleaned up the terminals with wet and dry. Then put the relay back together using a thin smear of Blue Hylomar on the edge of the mating face and left it a while to 'go off'. Then I wraped some insulating tape round the joint for good measure and reassembled. Remember to connect the positive cable to the battery first. I will let you know if the problem is fixed. Please let me know if I have cocked up on any of this  | |
Threaded Mode