Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Rear Ohlins spring

[Gizmo]

Originally Posted by twpd

Check here for the spring rates you need. Generally a soft rear spring does not cause the rear to step out. Too much preload, too much spring rate and too much compression damping will.

This is a useful site for decoding Ohlins spring rates and what rates you should be choosing.

or the shock is fully bottomed out and you've got no suspension at that point so tyre slips, so it might depend upon whether its sliding into the corner or exiting as you gas it and the rear has squated as far as it can.

[twpd]

I doubt very much it is anywhere near bottomed out though He'd have to be a right porker to do that.

[TopiToo]

Originally Posted by Gizmo

or the shock is fully bottomed out and you've got no suspension at that point so tyre slips, so it might depend upon whether its sliding into the corner or .

Hello,

I was told after the settings done, that I will notice/feel as if the bike is
stepping out, ie ( exiting as you gas it and the rear has squated as far as it can) and not to worry, as this is normal, however the bike stepped out big time more than once, and put the fear of god into me.

The info I have is that there was no room for adjustment, dont get me wrong the bike felt different, just not safe enough for me.

I have tried to contact Nolimits for a contact number for Colin (suspension guy) but as yet nothing. I am thinking alone the lines, my settings have been changed, by somebody who claimed to know Ducati's,

I hope I am wrong, but needs sorting.


TopiToo

[chris.p]

I have just had my Ohlins serviced by K-tech, these are the settings they put on the shock after servicing it.
Spring....64N
Compression...10 clicks/turns out ( turn adjuster fully in(clockwise) then turn out(anti-clockwise).
Rebound....18 clicks/turns out
sag without rider 14 to 20mm

These are base settings to work from to get the shock how you like it.
hope this helps.

Do not forget to write down your present settings so that you can compare them to the above.

Chris.

[TopiToo]

Hello Chris.p

Thankyou for that will try as stated, see where I go from there.


TopiToo