| #10  03-Jun-2006, 22:28 | ||||
| ||||
| I have just had my Ohlins serviced by K-tech, these are the settings they put on the shock after servicing it. Spring....64N Compression...10 clicks/turns out ( turn adjuster fully in(clockwise) then turn out(anti-clockwise). Rebound....18 clicks/turns out sag without rider 14 to 20mm These are base settings to work from to get the shock how you like it. hope this helps. Do not forget to write down your present settings so that you can compare them to the above. Chris.   |
Threaded Mode