Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Gearing

[BDG]

I'd suggest putting 14 on the front and 45 on the rear, should make life interesting

[Redruth]

John, isn't Shaun supposed to be a friend of yours?

You could do worse than take Shazaam's recommendation. I went with the 15/42 (his table says 43) on the 996 and it made a huge difference to the low gears. Sorted out all the pulling away problems, just left the top end a bit short but that shouldn't matter if you're just riding it on track, should it?

[JPM]

I'd use friend in the loosest of terms Ruth

Gizmo - I don't need taller gears to stay with Hebbo, either just bigger spuds or close my eyes.

Shaun - Is that what you run????

[Loz]

Hebbo runs 14 at the front and the standard rear on his 999R. Plus, I think, a nitrous kit

He doesn't want to mess around with the chain or wheelbase, he says, hence the 14T.

Myself, I will be going down the 15/38 - 96 route as suggested by Gizmo (and others)!

[madmav]

Originally Posted by BDG

I'd suggest putting 14 on the front and 45 on the rear, should make life interesting

I done that on me Gixxer LOL 1st to 6th in 1.5 seconds!

[andyb]

As you saw mate i run now the std 15 front and 40 rear. I was on 15/38 rear, but struggled to pull top gear even on hanger straight!

I have to say first impressions of this combination at Oulton were quite impressive. its not too fierce even over the rise and down to hizzys!

I have 2 extra links in my chain this works with both the 38 and 40 rear and puts the rear wheel in the centre of the adjustments on the 40 and 10mm longer on the 38.

go for it!