Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Clutch wear

[Lee]

Dave,

for info:
new friction plates are 3.0mm with a wear limit of 2.5mm
and
2.0mm and 1.5mm steel plates should only need replacing if they are warped or scored

as Darren says - probably just needs a good clean

[doogalman]

I've had to replace the sprung plate as that had flattened out. The metal plate wit a dot stamped into it. Should be dished in shape.