Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
Prev   Next
  #2  
Old 20-Jun-2006, 06:25
DaveB916
 
Posts: n/a
You have checked the bulb? I assume so but you do not mention it.

Then if you find the connector at the tank you should be able to bridge out the appropriate pins to 'make the circuit' and test the sender unit?

A quick look on the 'Haynes' looks like light blue and dark blue with black marking wires, light blue being a fused feed and dark blue then off to fuel warning bulb, but just to confuse matters this changes to brown and white in harness before bulb.

The fuel light is fused along with the neutral light and oil pressure light so if those are working the fuse is ok.

So I reckon short out light blue and dark blue at plug and see if light comes on if so then sender at fault, if not trace the wire to where blue becomes brown/white and look for bad joint.

Hope that helps?

Any mishaps fuse No. 4.

Cheers
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 02:02.