Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > General Motorcycles only > Chain Splitting Advice Quick!!

[Nigel C]

never heard of that make of breaker! should there be a sharp pointy that goes in place of the bit that pushes the plates on? not sure if it's on yours? but ones i have seen the point goes against the end of the pin and screwing it in splays out the end of the pin .

hope that helps a bit !!!!

[chris.p]

Daft question, but why not ask the friend you borrowed it from, he must have used it before????



Chris

[955sp3]

unfortunately he bought it and has never actually used it himself, so doesnt know!

[Iconic944ss]

one write up here:

http://www.webbikeworld.com/t2/motor...hain-sprocket/

but this is better:

http://www.fireblades.org/forums/art...blackbird.html

Good luck - Frank

Damn.. you need to be a member to view the pics on the fireblade forum....

So....I had a look through the Chain manufacturers websites - Regina came up trumps:

http://www.reginachain.it/eng/use_an...ow_to06c.shtml

Hope it works

[Tonio600]

angle grinder rules