Radial mastercylinder mounting

mikesps · 06-Nov-2006, 12:30

I used a longer bolt on one of the bar mounts with a spacer sleeve under it. Photo possibly attached.

Tinkler · 08-Nov-2006, 18:56

Hi there thanks for all your replys very helpfull, Got both the clutch and the brake mounted today incluing making the brackets and bleeding the system
Should have some photos soon
thanks again
Jamie

Tinkler · 28-Nov-2006, 09:32

Okgot everything fitted and seems to be working ok, so heres how i mounted my resovours !!

khushy · 28-Nov-2006, 11:52

exactly the same brackets - very neat!

Khushy

bradders · 28-Nov-2006, 12:36

did you make the brakets or are they off the shelf? If I keep sps then I have a brembo to fit over the winter and will probably be looking for a clutch one too
thanks

webbyc · 28-Nov-2006, 14:06

I found on my SPS that I had to have longer bars because they fouled the clocks which is an mot failure.

khushy · 28-Nov-2006, 21:09

Quote:

Originally Posted by bradders

did you make the brakets or are they off the shelf? If I keep sps then I have a brembo to fit over the winter and will probably be looking for a clutch one too
thanks

bought - off the shelf - they are Motrax mirror bar-end mirror mounts that fit on the ends of the handlebars (I have long bars) I only used the bracket and the tapered internal bar mount - I then butchered the actual mirror mount - added a carbon rod - a titanium bolt etc and hey presto!

Khushy

9rrr · 28-Nov-2006, 22:59

Just ordered some after market brembo master cylinders myself. Can you use the original brackets with the new cylinders ?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode
Postbit Selector
		Use Vertical Postbit

08-Nov-2006, 18:56	#2
Tinkler Registered Forum User Bevel Head Posts: 93 Join Date: Oct 2005 Location: Scunthorpe Mood: Horney Master cylinder Hi there thanks for all your replys very helpfull, Got both the clutch and the brake mounted today incluing making the brackets and bleeding the system Should have some photos soon thanks again Jamie Reply

28-Nov-2006, 12:36	#5
bradders Registered Forum User MotoGP God Bikes: 848, M620 DD bike Posts: 11,913 Join Date: Aug 2003 Location: Hants Mood: waiting... did you make the brakets or are they off the shelf? If I keep sps then I have a brembo to fit over the winter and will probably be looking for a clutch one too thanks Reply

28-Nov-2006, 14:06	#6
webbyc Registered Forum User Ducati Corse Posts: 3,087 Join Date: Mar 2003 Location: Ashtead, Surrey Mood: www.suzukisportingclub.com the only place to be I found on my SPS that I had to have longer bars because they fouled the clocks which is an mot failure. Reply

28-Nov-2006, 22:59	#8
9rrr Registered Forum User Mille Posts: 146 Join Date: Jun 2006 Radial master cylinder Just ordered some after market brembo master cylinders myself. Can you use the original brackets with the new cylinders ? Reply