Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Which cans for a 748s

[Rattler]

....but I'd get a chip from JHP or AJ Racing. The Ducati Performance ones used to be a bit iffy and there were some bad ones about.

Check out ebay for some 45 or 50mm termis, then give JHP a call for a suitable chip. They're probably cheaper than DP ones anyway.

There are some 50mm termis on eaby;

http://cgi.ebay.co.uk/ws/eBayISAPI.d...tegory=10 448

Drop him mail and see if he's selling the 45mm - 50mm balance pipe too, or just the end cans.

Tim